Last Updated on June 30, 2019 by Husain Parvez
Easy guide on how to replace any iPhone battery
Most people tend to have a fixated mind that once their iPhone’s battery starts draining faster than it normally does, then the whole phone becomes useless. This is not usually the case; sometimes the issue is just the battery, nothing more. It is advisable that once you realise your iPhone is acting up, you should run some numerous tests to be completely sure it is a major problem before you go for an upgrade which will break your bank.
The other fact is that no phone battery is built to last forever, they eventually lose value and their capability to hold a charge for long diminish with time. The only sure way you can protect your investment is by acquainting yourself with Apple iPhone battery replacement skills. This way you don’t have to make any hasty decisions that will end up draining your pocket whenever your phone starts misbehaving.
Signs that your iPhone 7’s battery needs a replacement.
If you have been an iPhone user for quite a long time, then you have an insight on how to detect a faulty battery. But if you have just started using it recently, then it might take you some time to realise it’s not the phone but the battery. Some of the basic indications you should watch out for include.
• Your iPhone’s battery draining power faster than usual.
• Your iPhone literary heats up from time to time
• The battery runs dry minutes after it has been fully charged.
• When your phone shuts down unexpectedly.
• When your iPhone can only work when plugged in a socket.
• When you realize your iPhone starts becoming sluggish.
• When your battery swells abnormally.
Once you notice these particular signs with your iPhone, then you should know that it is time to replace your battery. Lucky for you, replacing an iPhone’s battery is not a hard task. You only need to exercise patience and be on high alert during the iPhone battery replacement.
Once you realize that your iPhone battery is faulty, you are at liberty to take it to any of the iPhone Apple Stores where you will be charged some amount to get it replaced. The problem with these centres is that you will have to wait for a long time before they do the iPhone battery replacement and this is exactly what most people are trying to avoid. If the problem persists and you feel like you can’t take it anymore, then you should go ahead and do the Apple iPhone battery replacement yourself.
What you need for Apple iPhone battery replacement.
For the process to be smooth enough. You will need to have the appropriate tools that will help you in softening the adhesive, unscrewing the different screws available and dethatching the battery from the logic board. Some of these tools include.
- Phillips #000 Screwdriver.
- Tri-point Y000 Screwdriver Bit.
- Suction handle.
- Plastic cards.
- iFix Opening Picks set of 6.
- Spurger.
- Tweezers.
- iOPener.
- P2 Pentalobe screwdriver iPhone.
There are vendors who provide these kits with all the necessary tools and include a high quality battery for a very affordable price. We have found that Amazon has a great selection of offerings from different vendors. Some kits that we like are below. Make sure you select a kit made specifically for your iPhone type.
iPhone 6 Kit
iPhone 7 Kit
iPhone 8 Kit
Steps to take to replace your iPhone battery
As soon as you have these tools, be sure that there is no difficulty ahead that you won’t be able to undertake. All you need to do is apply the steps below cautiously and patiently until you make the replacement.
Step 1: Make sure the phone’s battery is flat.
To avoid disaster during the process, you should make sure that your iPhone’s battery is flat and powered off. This should be adhered to when performing any iPhone battery replacement procedure. It is because a full battery is bound to explode when punctured and this can end up living you without a phone.
Step 2: Unscrew the screws.
Remove the screws after confirming your phone is off then place your suction cup directly above the home button and ensure it is tightly sealed. Pull up the suction cup gently to separate the front and the rare case.
Step 3: Free the front panel from the back case.
You will need the suction cup and a plastic opening tool to detach these two parts from each other. Use the opening tool to pull the rear case from the display assembly slowly. Remove the plastic cup by squeezing the plastic nub. Pull the home button from the display assembly and away from the rear case.
Step 4: Detach the clips.
You will see a number of clips which you should gently swing them open. You will also find 5 screws inside which you should remove and always remember where each screw belongs to avoid confusion. Then proceed to remove the front panel assembly cable from the board.
Step 5: Disconnect the numerous cables.
You can now safely disconnect the front-facing camera, sensor cable, home button cable, the display data cable and digitiser cable connector then carefully disconnect the front panel assembly from the rare case.
Step 6: Remove the battery.
Proceed to remove the metal battery connector from the bracket then using the plastic opening tool, remove the battery connector from the socket. Once this is done, you should peel back the adhesive away from battery towards the bottom of the phone. Continue to pull until when the battery is free from the rear case.
Step 7: Replace.
Once the iPhone’s battery is removed, retrace the steps in reverse to fix the new battery to the iPhone. During the reverse process, make sure each cable is placed where it was disconnected earlier. Every screw whether 3.2mm or 1.2mm should be screwed back to the same position they were unscrewed from. This process should be carefully done until when everything is back in place.
By just following these simple steps, you will have removed the iPhone battery and replaced it without any problems. The key factor is that you should make sure the iPhone is switched off and the battery is drained before commencing the process. Moreover, you should also make sure that you have every single tool needed in the process.
These are basically the steps involved when replacing your iPhone’s battery. In no time you will end up with a fully functional iPhone with a battery that charges normally and drains as expected. All you have to do is remain focused throughout the process. You don’t want to end up with a faulty phone just because you did not pay enough attention.
Related articles on Why The Lucky Stiff:
- Slow Internet on Your Phone? Here’s How You Can Fix That - September 20, 2021
- Find A Great Laptop That’ll Suit You With The Help Of This Buying Guide - August 17, 2021
- How to Protect Your Secret Data on GitHub - August 12, 2021
Leave a Reply