Last Updated on April 27, 2020 by Jay
The iPhone 6 screen replacement guide might just be what you’d have to resort to if you have your precious phone’s screen smashed to smithereens, and don’t trust the after-market repair technician to do a good job. We’re here to help you understand everything you need to do to install the iPhone 6 replacement screen and get your device running like it used to.
Can iPhone screens be replaced?
It can happen in a heartbeat. One minute you have a perfectly smooth and healthy iPhone 6 screen and then one drop later, you’re left with tragically cracked one. Luckily, iPhone 6 replacement screen is actually pretty easy if you’ve got the right know-how and materials. Well, the good news is that you can replace your screen yourself to save money or go to a professional. If you are handy, it’s really easy to replace an iPhone 6 screen.
Of course, you may want to replace your screen for a number of other reasons. Maybe your touchscreen just doesn’t work and your iPhone has gone rogue, opening apps without permission. Regardless, with some guided instructions, you’ll understand how to replace iPhone 6 screen in no time.
Common Issues with iPhone 6 Screen
Before you go headfirst and try to dismantle your screen, you may be able to solve the problem in other ways that don’t require complete disassembly. However, if you’re certain that the problem is with your screen, then go right on ahead to the screen replacement portion of this article.
Before you do anything at all, just clean your screen first. A lot of touchscreen issues on our phones can be resolved if we just put the effort in to clean our screens.
It can be as simple as getting a cloth and some screen cleaner and you may be surprised to find that your touchscreen is working perfectly.
Your phone issues are most likely not caused by a dirty screen, but it’s always good to check. Plus, if you are planning on taking the phone apart, having a clean screen is not a bad idea.
Whether you’re experiencing software glitches, trigger touchscreen issues, random flickering, or home button malfunction problems, they can all be classified under two main types: software and hardware.
Software issues tend to be easily solved and don’t require the whole disassembly process. If you can help it, you’d probably want to avoid the disassembly process altogether.
Software problems may just be the result of misconfigured settings or certain apps just going rogue. In this case, the problem can be solved just by making a few settings changed or deleting some pesky apps.
So before you go head-first into phone surgery and understand how to replace iPhone 6 screen, consider trying the following.
Configure Your Display Settings
Sometimes it’s just as easy as turning brightness a little lower. Having your phone crank out a ton of lumens all the time can be taxing in a battery sense so it can mess with how you interact with your phone. Just turn auto-brightness and set your brightness low.
Restart Your iPhone
Turning it on and off again is basically cliché in the technology world but more times than not, it does turn out to be the solution. Chances are, those small bugs can easily be eradicated with a simple reboot.
Check Your iPhone’s Memory Status
An overabundant usage of memory storage can often lead to freezing and an unresponsive touchscreen. Check your iPhone’s internal memory storage to see if it’s good enough to carry out any more processes.
If not, it’s time to chuck some things into the trash can.
Factory Reset: The Last Resort
Factory Resetting your phone means that trying everything else just did not work at all. This should only come as a last resort as after you initiate the factory reset, all your data is going to disappear, restoring the phone to its initial default settings. If there were any software issues before, they should be cleared up at this point.
If not, then it’s definitely a hardware problem. That means it’s finally time to get your hands dirty with some DIY iPhone 6 screen replacement.
iPhone 6 Screen Replacement Guide
Before you start to understand how to replace iPhone 6 screen, make sure you have the right tools and materials. This includes:
An iPhone-specific toolkit (some tools below might be included so just get this item first)
Replacement iPhone 6 LCD screen (be sure that it doesn’t come with a home button)
- Suction Cup
- Plastic Pick
- Small Crosshead Screwdriver
- 5-Star Pentalobe Screwdriver
- Black Plastic Spudger
- ESD – Safe Tweezers
- Protective Eyewear (Just in case, safety always comes first)
In total, this might cost you just under $125 for all the items in total. However, you can get iPhone replacement screen kits on Amazon for much less for around $30.
Now, it’s time to do some actual disassembly/assembly. Before you start, be sure to first discharge the battery below 25%. Of course, make sure it’s completely turned off when you’re taking your device apart to understand how to replace iPhone 6 screen.
Step 1: Unscrewing the Pentalobe Screws and Taping Over the Display
The first step is simple. Just remove the two 3.6 mm-long Pentalobe screws next to the Lightning connector.
Next, add overlapping strips of clear packing tape over the iPhone’s display until the entire face is covered. Do this especially if your display case is cracked as to prevent any further cracking during your repairs.
The added structural integrity makes lifting the display off much easier.
Step 2: Manually Lifting the Display
Now, grab your suction cup. Place the suction cup right above the home button and press down tightly enough to ensure it is sealed. While holding the iPhone down with one hand, pull up the display with the other. Be sure to take your time and apply a constant force.
Now using a plastic opening tool, pry the rear case down and away from the display assembly all while still applying the same constant and gentle force with the suction cup.
Be wary of the several clips holding the front panel near the rear of the case and use a combination of the plastic tool and the suction cup to pry it open.
Step 3: Opening the iPhone
Pull the plastic nub to release the vacuum seal on the suction cup and start to steadily remove the display assembly.
Try swinging the home button end of the front panel away from the rear case here and using the very top of the phone as a hinge in order to open up the phone. (When you’re reassembling, make sure the clips near the hinge portion are clipped back into their slots).
Now, opening the display open, try keeping it propped up against something (like a wall or a book, just so the phone is opened while you’re working on the phone).
Step 4: Disconnecting and Removing the Battery
Remove both the 2.2 mm Phillip screw and the 3.2 mm Philip Screw from the battery connector bracket and gently remove the metal battery connector bracket from the iPhone.
Once you’ve done this, disconnect the battery connector by first grabbing the plastic opening tool before gently prying the battery connector out of its socket located right on the logic board.
Be extra careful that the socket specifically is removed and not the logic board itself as it could break the connection.
Step 5: Removing the Front Assembly Cable Bracket
Remove the three 1.2 mm screws, the 1.7 mm screw, and the 3.1 mm screw.
Be sure to a good record of where these screws are supposed to go afterwards! Screwing in the wrong screws could result in damaging the logic board.
Then, extract the front panel assembly cable bracket right from the logic board.
Step 6: Disconnecting All the Inner Parts
Now grabbing a spudger, disconnect the front-facing camera and sensor cable connector. Using the same spudger, disconnect the home button cable connector as well, being sure not to damage the logic board itself. Then, use the spudger once more to disconnect the display data cable connector.
Next, use the flat end of a spudger to disconnect the digitizer cable connector (be sure that when reconnecting the digitizer cable, don’t press directly on the center but rather on one end of the connector, then press the opposite end.
Step 7: Removing the Home Button
Next, remove the front panel assembly from the rear end of the case and proceed to unscrew the two 1.9 mm Phillips screws securing down the home button bracket before gently removing.
Next, using the point of a spudger, disconnect the home button cable connector by pushing it up away from the home button before gently pushing the top left corner away from the very front of the panel.
Peel the home button all the rest of the way off the display using the spudger and then carefully fix the spudger under the home button cable from the adhesive. With all the adhesive removed, you can now remove the home button cable.
Any glass shards lying in the home button should be carefully removed with caution.
Peel the home button all the rest of the way off of the display using the spudger and then carefully fix the spudger under the home button cable from the adhesive.
Step 8: Reassembly
This should be relatively simple as all you really need to do is follow the previous instructions in reverse order. If you can, replace all the screws you just used, although reusing the same screws should be fine as well.
Be sure you apply proper adhesive and use a heat gun to apply the adhesive for 3-5 minutes whenever appropriate (this will be when you’re reapplying your LCD case and putting the home button back on it).
Potential Issues after Screen Replacement
To avoid any possibility of issues after fixing, always be sure that you did the job right the first time. That means making sure all the connections were firmly placed and screwed properly.
Don’t cut corners when it comes to these things. If your phone is lagging or the touchscreen still isn’t working, it’s very possible it’s your pesky software acting up once again.
If your phone isn’t turning on properly when being charged, check to see if you need a new cable or if any lint and other debris is blocking up your cable port.
Backup your phone data and then restore your device again and be sure to set the iPhone up as a new device. Swipe to check for functionality and see if the issue still occurs. If it does, then again back to the drawing board, but if it doesn’t you can freely restore the data on your phone (unless you chose the factory rest of course).
In this case, the drawing board means you might have to go back to assembling and disassembling the iPhone once again if any touch screen issues persist even after restoring the software issues.
Frequently Asked Questions
Can I change my iPhone cracked screen at home?
Your iPhone 6 might have taken a small or even a mighty drop from your hand, and now your iPhone 6 screen is shattered in a million pieces. You may be thinking to go to the Apple store to get your out of warranty iPhone 6 cracked screen repaired, trust us; it will cost you a fortune. Yes, you can change and replace iPhone 6 screen at home if you don’t want it to get fixed by someone else you don’t trust your device with at all. All you have to do is order the iPhone 6 replacement screen from an online marketplace such as amazon.com. You might not have a 5-Star Pentalobe Screwdriver around. You can purchase an iPhone repairing kit that includes not only the proprietary screwdriver but also some spudgers, suction cup, plastic pick and a pair of tweezers which make the whole process of replacing your cracked iPhone 6 screen replaced at home. Before you start doing something wrong, read the full guide on how to replace iPhone 6 screen mentioned above.
How much it costs to replace the screen on iPhone 6?
If you want to get your iPhone 6 cracked screen replaced through a third-party repair shop, we do not a have definite answer to what it will cost you to replace your iPhone 6 screen. And Apple does not have a straight forward list on their website support page for what it will cost you to repair your broken iPhone 6 screen. Assuming you are ordering your parts from online marketplaces such as Amazon, has some iPhone 6 replacement screen kits that include not only the replacement screen but also all the tools you will need to replace your broken screen with a new display at home. These kits go around for as low as 30$. You can even get a screen replacement unit from ifixit.com for 69$ Replacing the screen at your home by your self can be a great DIY project, be it you use our guide to replace the screen mentioned above so that you don’t mess up the process and damage your iPhone 6 more.
How to fix a shattered iPhone 6 screen?
If your iPhone 6 screen has some minor cracks and scratches from a fall from your hand, slap a screen protector on the cracked screen for a temporary solution. It will at least ensure you do not get pierced with glass shards while using your iPhone 6. But you will have to restore all the glory of your iPhone 6 by replacing the screen eventually. If you are purchasing an iPhone 6 screen and repair kit from the internet, first read our guide to replace the screen above before you blow something up!
How to take off iPhone glass?
Your iPhone 6 LCD screen has two main components. The digitizer and the front glass with which both interact with each other up on touch input. If you are lucky and your iPhone 6 cracked screen does not act weird or have artefacts on display, you can separate the LCD panel from the glass screen. We do not recommend doing this by your self as it is a tedious process. It might cost you less doing so, but we recommend you to replace the entire unit to safeguard your screen quality.
Why my iPhone 6 won’t turn on after screen replacement?
It is always said to first check your engine, computer components or even smartphone internals whether they are working as intended before closing them shut. Before you screw in your iPhone 6 new display, make sure all your connectors are fitted properly, the battery connector should also be checked as it delivers the power to the entire device. After checking all the connectors, switch on your device and after you see an Apple logo and the touch works, screw in your new iPhone 6 display on the body.
Getting your iPhone 6 replacement screen fixed can sometimes be a doozy. If you have any issues with touch sensitivity, just make sure it’s a software problem and not a hardware problem. Or you’ll have to do redo the whole process over again and tighten up any loose screws.
It’s imperative that you keep track of all the screws that you’ve unscrewed as putting back the wrong ones can spell disaster and wreak havoc for your phone.
- Best Digital Learning Tools for Students and Teachers - December 1, 2021
- Slow Internet on Your Phone? Here’s How You Can Fix That - September 20, 2021
- Find A Great Laptop That’ll Suit You With The Help Of This Buying Guide - August 17, 2021